Professional external rendering for homes across Great Baddow, Galleywood, Sandon and the surrounding CM postcodes — delivered by a contractor with 30 years of experience.
Great Baddow has kept its own centre, an old village street with period property along it, and around that sit large 20th-century estates running from interwar semis through to modern infill. Two quite different sorts of wall, then, inside one CM2 village — and they want opposite things from a render system. The old ones need to breathe. The estate ones are usually better off being insulated at the same time as they are rendered.
Most housing in Great Baddow went up during the 20th century, and on that stock external wall insulation changes rather more than the look of the place. Boards are fixed to the outside face of the existing wall, then meshed, base-coated and finished in render, so the house comes out warmer and re-clad under a single scaffold. Treating it as one job is the entire point: rendering now and insulating in five years means paying twice for the scaffold, twice for the beads and twice for the finish coat. What the build-up actually involves is set out on external wall insulation fitted under a render finish.
Insulation adds thickness to the face of a wall, and that brings consequences better known about beforehand than discovered halfway through. Window and door reveals get deeper. Sills may want extending or replacing so water still throws clear of the new face. The roof edge, the verge and the rainwater goods all have to be checked against the new wall line, and anything bolted to the wall has to come forward with it:
None of that is difficult, but all of it belongs on the quote rather than in a conversation on week two.
The older property around the village street is a different specification entirely. Where a wall is solid and was built to dry outwards, wrapping it in board and a sealed finish is the wrong answer and a breathable render on its own is usually the right one. It is worth saying plainly, because the two sit a few hundred yards apart here: the fact that external wall insulation suits the estate housing does not mean it suits the house on the old street. The wall decides that, not the postcode.
Plenty of the estate stock here still wears its original pebble dash, and the question owners ask is whether to cover it or get rid of it. Firmly stuck dash is better covered: mesh is pinned mechanically through it into the masonry behind and the new finish built up over the top, which saves hacking a whole house back to brick for no gain. If insulation is going on as well, the dash matters even less, since the boards are fixed back through it into the wall. The only dash that has to come away is the dash already letting go.
Silk Render Ltd, thirty years at it, fully insured, working to a fixed itemised quote — the figure agreed is the figure paid, and the scaffolding is arranged by us rather than left with you. The systems put on the wall are manufacturer approved: SPS, Enviraul, Balmet and Atlas. External wall insulation and rendering over pebble dash are what this side of CM2 asks for most, with full house rendering and silicone render alongside them. The number to ring is 07534 738068.
Great Baddow is in CM2 on the south-eastern edge of Chelmsford, and the villages on this side of it are covered too — Galleywood, Sandon, Little Baddow and the roads out towards the A130 and the A414. Carry on east and the ground rises sharply, where rendering on exposed Danbury property is the page that applies.
We regularly carry out rendering work throughout Great Baddow, Galleywood and Sandon. The mix of Victorian brick terraces, 1930s pebble dash semis and modern estates means pebble dash removal and re-render is a common local job, alongside routine maintenance render on the newer builds. Whether your home currently has bare brick, tired pebble dash or ageing render, we assess it honestly, recommend the right system, and deliver a finish that transforms the property and stands up to the local weather. We also regularly work in the following areas close to Great Baddow:
That sort of house is the usual candidate for it. Boards go onto the outside of the existing wall, then mesh, base coat and the render finish over the top, all under one scaffold. What gets checked first is the condition of the wall behind and the detailing at the roof edge and around the openings.
Often not. An older solid wall has to lose moisture outwards, and wrapping it in board and a sealed finish can trap that moisture in the structure. On buildings like that a breathable render straight onto the wall is usually the sensible specification, and if the property is protected in any way the position needs checking with the local planning authority first.
Thicker by the depth of the board plus the render build-up over it, which is exactly why reveals, sills, gutters and the roof overhang are part of the conversation before anything is agreed. Those items go on the quote rather than being found on site.
Yes, along with Little Baddow and the roads running out towards Danbury. The old centre and the estates around it are the bulk of what comes up in CM2, but the surrounding villages are the same patch and the same service.
If you’re planning a rendering project in Essex and want a contractor you can trust to do it properly — get in touch today. We’ll be happy to discuss your requirements, visit your property, and provide a clear, honest, no-obligation quote.
